Observe the balance indicator at the tip of the beam. It should hover perfectly in the center of the travel slot.
Ensure the commodity platter is clean and completely empty before placing items on it.
Temperature changes and physical movement can occasionally cause the pointer to drift away from zero. How to Adjust the Zero Point Ensure the platter is completely clean and empty. avery berkel l115 manual new
Typically 18 inches x 24 inches (approx. 455 mm x 610 mm), though variations exist based on production year.
Improper installation can cause permanent damage to the delicate internal mechanism or lead to inaccurate weight readings. Follow these steps carefully: Step 1: Choosing the Location Observe the balance indicator at the tip of the beam
Turn the small micro-adjusting balance balance-screw (located at the far left or far right of the beam assembly) outward/clockwise to add leverage, or open the balance chamber balance-box and add tiny lead shots or washers.
Place the scale on a completely flat, hard, and level floor. Soft or uneven ground will cause inaccurate readings. 455 mm x 610 mm), though variations exist
Note: Save these transit locks in case you need to transport the scale in the future. Step 3: Leveling the Scale
Heavy-duty cast-iron base, pillar, and platform; machined steel levers and hardened steel knife-edges (pivots) and bearings. Power Requirements: None. 100% mechanical operation.
Adjust the leveling feet until the bubble sits perfectly in the center circle. Calibration and Zero Adjustment