The main purpose of the Canon Service Tool V5204 is to perform a waste ink counter reset. Every time a Canon printer performs a self-cleaning cycle or prints, a small amount of ink is diverted into a built-in waste ink absorber pad to prevent leaks and keep the print area clean. The printer's internal counter tracks the amount of ink sent to this pad to prevent overflow, which could damage the machine. Once this counter reaches a pre-defined limit (often 100%), the printer locks itself with an error message, such as one of the following:
Assuming you have accepted the risks and downloaded a clean version of the tool, follow this guide meticulously.
Resets various internal printer settings. canon service tool v5204 portable
In the "Main" tab, find the Ink Absorber Counter section. Click "Set" to reset the value to 0%. ⚠️ Critical Safety & Technical Tips
Press and hold down the Stop/Reset (red triangle) button. The main purpose of the Canon Service Tool
While still holding the Stop/Reset button, press and hold the button.
During printhead cleaning cycles and borderless printing, excess ink is pumped away from the cartridges into physical porous foam pads located at the bottom of the printer. Canon uses an internal digital counter to estimate when these pads are fully saturated. Once this counter reaches a pre-defined limit (often
To understand why you need v5204, you must understand how Canon printers handle waste ink.
indicating the ink absorber is nearly full.
The "Portable" designation means:
The green power light will flash for a few moments and then stay solid. If the light stays solid green, your printer is successfully in Service Mode. Your computer may display a pop-up acknowledging "New Hardware Found." Step 2: Running the Portable Service Tool
