Cem Dual Mig 120 Manual [verified] -

E71T-GS or E71T-11 Flux-Cored wire (0.8mm or 0.9mm).

Typically supports both gas (MIG/MAG) and gasless (Flux-cored) welding. Duty Cycle:

Use only in well-ventilated areas to avoid inhaling welding fumes. device.report 2. Unboxing & Initial Setup cem dual mig 120 manual

Always grind away rust, paint, and oil from the metal surface before welding to avoid porosity and weak welds.

Regularly clean spatter out of the torch nozzle using MIG pliers, and apply anti-spatter spray to prevent build-up. E71T-GS or E71T-11 Flux-Cored wire (0

Replace the contact tip if it becomes worn or burns back.

Grind workpiece to clean steel. Increase power selector switches. device

, a versatile welding machine designed for both gas and gasless applications. This model is commonly used for automotive and light workshop repairs due to its manageable power range and dual-functionality. 1. Technical Specifications

Whether you are a beginner looking to weld your first project or a seasoned DIYer, understanding the technical specifications, setup procedures, and maintenance of the CEM Dual MIG 120