The exact button labels may vary slightly by version, but the following steps apply to the typical GE digital timer:
Press the button to select specific days of the week (e.g., Mon-Fri, Weekends, or All Days). Press the Program button again to advance to "PGM 1 OFF".
| ✓ | Task | |---|---| | ☐ | Circuit breaker is OFF during installation | | ☐ | All wire nuts are tight | | ☐ | No bare copper is exposed beyond the wire nuts | | ☐ | Timer is securely mounted to the wall box | | ☐ | Wall plate is attached | | ☐ | Power restored and display illuminates | | ☐ | Clock is set to the correct time and day | | ☐ | At least one ON/OFF program is set | | ☐ | Timer is in AUTO mode | | ☐ | Connected device turns on/off as programmed | ge timer switch 532641l3 instruction manual pdf pdf install
⚠️
Press to begin. Use UP/DOWN buttons to set the current time, year, month, and day, pressing SET after each. Enable DST (Daylight Saving Time) if applicable. The exact button labels may vary slightly by
Tuck wires neatly into the box and secure the timer using the provided screws. Reattach the wall plate and restore power. : The unit may take about
How to Install and Program Your GE In-Wall Digital Timer Switch Use UP/DOWN buttons to set the current time,
If you have followed this guide and are still experiencing issues, consider these resources:
