This is the most common and straightforward method. The specific button combination can vary slightly between different Mi Box S models and firmware versions, so you may need to try a couple of variations.
: Press and hold the "OK" button (the center of the directional wheel) and the "Back" button (the arrow pointing left) simultaneously.
Wait for the text at the bottom of the screen to read Highlight Reboot system now and press OK .
A: This is often caused by a failed system update, corrupted firmware, or a problematic app that interferes with the boot process. how to open recovery mode on xiaomi mi box s tv fix
is the ultimate fix for severe software issues like boot loops, freezing, and black screens. Why Use Recovery Mode?
This isolation allows you to access Recovery Mode even if your Mi Box S refuses to boot up normally, stays stuck on the Mi logo, or suffers from severe system instability. From this menu, you can bypass the standard software settings to wipe corrupted data or apply manual system updates. Prerequisites Before You Begin
Ensure your Mi Box S Bluetooth remote has fresh batteries. This is the most common and straightforward method
Note: On some regional versions or newer firmware updates of the Mi Box S remote, the required combination might be the (circle icon) and Back buttons instead. If the OK + Back method fails, try Home + Back. Step 3: Reconnect the Power
Position yourself close to the Mi Box S to ensure the Bluetooth or Infrared signal registers immediately upon boot. Locate the two necessary buttons depending on your specific remote model:
⚠️ : If your device is stuck on the Android TV logo or a black screen, unplugging and trying Method 1 or 2 multiple times usually works. Hold the buttons until the recovery text appears — don’t let go early. Wait for the text at the bottom of
| Problem | Recovery Mode Solution | Steps in Recovery Mode | | :--- | :--- | :--- | | (Device restarts endlessly at logo) | Wipe data/factory reset | 1. Navigate to Wipe data / factory reset 2. Press the OK button to confirm. 3. Select Yes to confirm again. | | Stuck at Mi Logo (Device freezes on startup) | Wipe cache partition | 1. Navigate to Wipe cache partition 2. Press OK to confirm. This deletes temporary files without erasing your personal data. | | Sluggish Performance & App Crashes | Wipe cache partition | (Same as above) This is always a good first troubleshooting step as it cleans out temporary system junk. | | Failed System Update | Apply update from EXT | 1. Download the correct firmware for your Mi Box S on a PC from a trusted source. 2. Rename it to update.zip and copy it to a USB drive formatted as FAT32 . 3. Insert the USB drive into your Mi Box S while in Recovery Mode. 4. Navigate to Apply update from EXT > Update from udisk > update.zip . |
If your Mi Box S can boot up enough to allow you to enable "Developer options" and "USB debugging," you can use ADB commands to force it into Recovery Mode.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.