Double-check that the downloaded binary ( .bin or .tar ) explicitly matches the HG658 V2 designation. Do not use firmware meant for the HG658c or HG659.
Final note: For step-by-step commands and files specific to your exact hardware revision (HG658 v2 sub-variant), consult device-specific threads or provide the device label details (hardware version, firmware version) so a targeted procedure can be given.
Acquire the specific .bin or .img firmware file from a trusted repository (such as the official OpenWrt device page or verified telecom forum mirrors for the generic Huawei firmware). Step 2: Configure Your PC's IP Address
with "crippled" firmware that hides settings for Bridge Mode, custom DNS, or VoIP. huawei hg658 v2 custom firmware
Before attempting any flash, you must identify your specific hardware version. The HG658 series has two main variants:
In the end, the HG658 V2 remains a stubborn relic of the ISP-controlled era—a device that many have tried to "set free," but few have truly conquered.
If you install custom firmware, you will likely lose your telephone line (DSL) port functionality . The router will become a pure Ethernet router/switch/Wi-Fi access point . Double-check that the downloaded binary (
Wait 3 to 5 minutes until the router automatically reboots and the power light stabilizes.
| You are… | Recommendation | |----------|----------------| | A tinkerer with JTAG gear | Go for it. Learn something new. | | Using it as a pure router (cable/FTTP) | Yes – custom firmware improves performance. | | Dependent on VDSL/ADSL | . Stick to stock or buy a separate modem. | | A beginner | Avoid . Sell it on eBay and buy a used TP-Link Archer C7 (OpenWrt friendly). |
: Includes a USB port that can be used for basic Network Attached Storage (NAS). Limitations : It is limited to Acquire the specific
The only viable, modern custom firmware for the HG658 v2 is (version 19.07.7 or newer). DD-WRT and Tomato do not officially support this chipset.
While you cannot install OpenWrt, you can gain to the stock firmware. The stock firmware is a heavily modified Linux kernel (usually version 2.6.36 or 3.4).
Double-check that the downloaded binary ( .bin or .tar ) explicitly matches the HG658 V2 designation. Do not use firmware meant for the HG658c or HG659.
Final note: For step-by-step commands and files specific to your exact hardware revision (HG658 v2 sub-variant), consult device-specific threads or provide the device label details (hardware version, firmware version) so a targeted procedure can be given.
Acquire the specific .bin or .img firmware file from a trusted repository (such as the official OpenWrt device page or verified telecom forum mirrors for the generic Huawei firmware). Step 2: Configure Your PC's IP Address
with "crippled" firmware that hides settings for Bridge Mode, custom DNS, or VoIP.
Before attempting any flash, you must identify your specific hardware version. The HG658 series has two main variants:
In the end, the HG658 V2 remains a stubborn relic of the ISP-controlled era—a device that many have tried to "set free," but few have truly conquered.
If you install custom firmware, you will likely lose your telephone line (DSL) port functionality . The router will become a pure Ethernet router/switch/Wi-Fi access point .
Wait 3 to 5 minutes until the router automatically reboots and the power light stabilizes.
| You are… | Recommendation | |----------|----------------| | A tinkerer with JTAG gear | Go for it. Learn something new. | | Using it as a pure router (cable/FTTP) | Yes – custom firmware improves performance. | | Dependent on VDSL/ADSL | . Stick to stock or buy a separate modem. | | A beginner | Avoid . Sell it on eBay and buy a used TP-Link Archer C7 (OpenWrt friendly). |
: Includes a USB port that can be used for basic Network Attached Storage (NAS). Limitations : It is limited to
The only viable, modern custom firmware for the HG658 v2 is (version 19.07.7 or newer). DD-WRT and Tomato do not officially support this chipset.
While you cannot install OpenWrt, you can gain to the stock firmware. The stock firmware is a heavily modified Linux kernel (usually version 2.6.36 or 3.4).