L1 --> Stop Button --> Start Button --> Contactor Coil A1 Contactor Coil A2 --> 95 (Overload NC) --> 96 --> Neutral
Disables the engine and clears active fault codes. Use this mode during system maintenance.
Allows the operator to start and stop the engine manually using the "Start" and "Stop" buttons. lovato 31 rgam 12 user manual
Wired directly to the output lines of the generator's alternator to confirm voltage stability before closing the changeover mechanism. 2. Digital Control Signal Array
Using the protective silicon faceplate, advanced parameters can be altered by pressing specialized key combinations to access the primary programming array. L1 --> Stop Button --> Start Button -->
12V DC (optimized for standard engine starter batteries).
This guide provides a comprehensive overview of the setup, wiring, and operational parameters found in the Lovato 31 RGAM 12 user manual. 1. Technical Specifications Wired directly to the output lines of the
Excessive current drawn by downstream loads. Shed non-essential sub-circuits. Emergency Stop Tripped
The manuals currently available online are for the original Lovato series, such as the .