In the dropdown menu, explicitly select PS2251-07 .
, as modern Windows 10/11 security often blocks the low-level drivers needed by MPALL. Check Sum Error:
: The actual operating system software written to the controller.
Use standard tools like Rufus or the Windows Format tool. phison ps225107ps2307 mptool install
Unlike simple formatting tools, MPtool interacts directly with the controller’s firmware. Using the wrong settings or firmware will permanently destroy the drive.
Note: Ensure your burner and firmware files match your specific NAND memory type (e.g., Toshiba or SanDisk memory chips). Step 2: Install and Extract Phison MPTool
Do not use MPtool versions designed for PS2251-03, PS2251-09, or PS2251-01. In the dropdown menu, explicitly select PS2251-07
: A sequence of hex characters (e.g., AD 3A 18 03 or AD DE 94 A7 ).
Move the drive to a rear motherboard USB 2.0 port. If it remains dead, use . CT - 0x1042 Low-level hardware block failure.
(Optional) If your device is structurally degraded, go to the partition settings and check , then set a targeted manual capacity slightly lower than your maximum size to isolate bad blocks. Use standard tools like Rufus or the Windows Format tool
These tools perform low-level operations that will erase all data on the drive. If the tool hangs between attempts, check your Task Manager and kill any lingering MPALL processes before trying again. Phison MPALL v5.13.0C - USBDev.ru
Do NOT unplug the drive until the box turns Green (Success). If it turns Red , note the error code (e.g., 0x1106). Troubleshooting & Expert Tips Phison PS2251-07 (PS2307) Firmware [BN07*.BIN, FW07*.BIN]
Ensure that the dropdown menu at the top of the interface points to the MP.ini file you saved during the parameter setup step.