: Only firmware version V12.01.01.X can be upgraded to certain specific new versions; check the Tenda Russia support notes if you have that specific build.
Before downloading firmware, you must know your router’s . On the bottom label of the Tenda N301, look for Ver: or Hardware Version (e.g., V1.0 , V2.0 , V3.0 ). Using the wrong version can brick the router.
Watch the LED lights; they will all flash simultaneously and then turn off. tenda n301 firmware update download work
Enter the default gateway IP address into the address bar and press Enter.
If your update does not work or your router becomes unresponsive, try these recovery steps: : Only firmware version V12
⚠️ If Tenda’s global site doesn’t list your region’s version, visit your local Tenda domain (e.g., tenda.com.cn for China, or tenda.com.au for Australia).
Assign a static IP address to your computer's network card (e.g., 192.168.0.10 , subnet mask 255.255.255.0 ). Unplug the power cable from the Tenda router. Using the wrong version can brick the router
Write down your hardware version. Without it, you cannot proceed safely.
firmware current, you ensure that your wireless network remains fast, reliable, and secure for all your connected devices.
Ensure you unzipped the downloaded archive. The router will not accept .zip files; it requires the extracted .bin file.
It is highly recommended to perform this step using a wired Ethernet connection rather than Wi-Fi to prevent the update from being interrupted. Connect your computer to one of the LAN ports on the Tenda N301 via an Ethernet cable.